The high-frequency induction heating machine plays the role of heating the bearing in the shrink fitting process

The high-frequency induction heating machine plays the role of heating the bearing in the shrink fitting process. The high-frequency current generated by the high-frequency induction heating machine causes eddy currents in the inner or outer ring of the bearing and heats it up quickly.

The process of bearing induction shrink fitting generally includes the following steps:

1. Place the bearing in the induction coil of the high-frequency induction heating machine, adjust the position and alignment.

2. Turn on the high-frequency induction heating machine and adjust parameters such as current, frequency, power and heating time.

3. In the heating process, pay attention to the heating speed and temperature to avoid problems such as overheating, oxidation, and deformation.

4. When the bearing heats up to the right temperature, quickly remove the bearing and put it on the shaft.

5. Bearings after the completion of the shrink fitting need to be cooled to avoid problems such as deformation and cracks caused by overheating.

Safety precautions for bearing shrink fitting with high-frequency induction heating machine:

• Before using a high-frequency induction heating machine, it is necessary to understand the operation methods, precautions and safety protection measures of the equipment.

• Correctly select the power and frequency of the high-frequency induction heating machine to ensure that the capacity and heating speed of the heating equipment meet the requirements.

• Control heating speed and temperature to avoid overheating, oxidation, deformation and other problems.

• Regularly inspect and maintain the high-frequency induction heating machine to ensure the normal operation and service life of the heating equipment.

• Pay attention to safety during operation to avoid scalding and mechanical injury.